4.2mm Red oak fancy plywood
1. Wear-resistant,anti-cracking,anti-acid and alkaline-resistant.
2. No color cotamination between the concrete and shuttering board.
3. Can be cut into small size for reusing.
Production Specifications | |
Quality Type | Red oak Fancy Plywood |
Face | Red Oak,Natrual Teak, EV Teak, EP Teak, Ash, Walnut, Cherry, Wenge, Beech, Maple, Ebony, Sapeli, Zabrawood, Rosewood, Apricot etc... |
Back | Poplar/Hardwood |
Core | Poplar, Hardwood, Combi, Eucalyptus |
Grade | A, AA, AAA |
Glue | MR glue,E1,E2 |
Size(mm) | 1220×2440, 915*2135, other door size, or as requested |
Thickness(mm) | 1.6mm-5mm or as your requested |
Moisture | 8-16% |
Packing | Standard pallet packing: |
Inner plastic bags,outer three-plys or paper box, wrapped with steel tapes by 4x6 lines for reinforce | |
Usage | Interior Decoration, Furniture |
Supply Ability | About 1000CBM per week |
MOQ | 20FT Container, about 24CBM |
Payment Terms | 1. 100% L/C at sight |
2. 30% T/T in advance, 70% L/C at sight | |
3. 30T/T in advance, 70 T/T at sight of BL copy | |
Delievery Time | Within 20 days after receiving 30% deposit or original L/C at sight |
Fancy plywood is much more expensive than common commercial plywood . Generally speaking, the fancy face/back veneers (outer veneers) are about 2~6 times as expensive as common hardwood face/back veneers (such as red hardwood veneers, Okoume veneers, Red Canarium veneers, poplar veneers, pine veneers and so on) . In order to save costs, most of customers require only one side of plywood to be faced with fancy veneers and the other side of plywood to be faced with common hardwood veneers. Fancy plywood is used where the appearance of plywood is most important . So the fancy veneers should have good-looking grain and be top grade (A grade). Fancy plywood are very flat, smooth.
In the interior decoration, due to the different location of use, the specification and thickness of plywood are different. Before purchasing, make a budget and a list to avoid unnecessary waste. The following points should be noted during selection.
(1) Plywood shall have clear wood grain, smooth and smooth front, no roughness, and be flat without sluggish feel. The splint has two sides.
(2) Plywood shall be free from defects such as damage, bruise, hard wound and knot scar.
(3) Lift one side of the plywood with both hands, and you can feel whether the board is flat and even, and whether there is bending and warping tension.
(4) Individual plywood is made by pasting two veneers with different grain together, so pay attention to whether the joint of plywood should be tight and uneven.