Wood veneer
| Product Name | YOTOP PET Board/ HPL Board |
| Size | 1220x2440mm,1200*2400mm or customized |
| Thickness | 2-25mm |
| Thickness Tolerance | +/-0.3~0.5mm |
| Face/Back | PET film/ HPL laminated |
| Surface Treatment | Matt, textured or glossy |
| HPL Color | Solid color/wood grain |
| HPL Thickness | 0.5~1mm |
| Core | OSB/MDF/Particleboard/Plywood |
| Glue | WBP |
| Grade | A grade |
| Delivery Time | Within 20 days after receiving deposit or original L/C at sight |
| Certification | SO9001:2000, CE, CARB |
| Technical Parameters | Moisture Content:10%~15% |
| Water Absorption:≤10% | |
| Modulus of Elasticity:≥5000Mpa | |
| Static Bending Strength:≥30Mpa | |
| Surface Bonding Strength:≥1.60Mpa | |
| Internal Bonding Strength:≥0.90Mpa | |
| Screw Holding Ability:Face ≥1900N,Edge≥1200N |
Wood veneers in the simplest of terms are thin slices of natural wood generally less than 1/40” thick. These veneers are typically pressed onto or laminated to thicker core materials such as plywood, particle board and MDF to create structural panels to be used in place of thicker hardwood lumber. This is still real wood but machinery and technology allow the material to be sliced thin without waste instead of sawing it into thick boards. Just like thick boards, it can be plain sawn, quarter sawn, rift cut, or rotary cut and produce the many different grain patterns associated with each cut.
Along with natural hard and soft wood veneers, there are reconstituted or engineered wood veneers which are man-made but still natural wood cellulose fiber. These are made from renewable and highly sustainable forests and are often made to replicate exotic woods that are either endangered, limited, or very expensive to acquire.
